Project intro <Car Controlled By Hand Gestures>


  • Role allocation
       Project manager Youssef Mahany 201581462

       Designer Gregory Paphiti 201567365

       Developer Haoran Jiang 201676488

       Technical Writer Yibing Chen 201676158

  • Introduction

This project aims to build a device that allows users to control a car kit by giving hand gesture commands. Two primary circuits with one connecting the engines of the car kit and another worn on hand so as to read the movements of the wrist are required i.e. 'receiver' and 'transmitter'.




 

  • transmitter 

Arduino Nano, Bluetooth HC-05, ADXL335, Resistors 

  • receiver 

Arduino Uno, Bluetooth HC-05, L293N, 


 All the codes related are shown here in the link.

 https://github.com/YBBBB-C/gesture-Control-Car





 
Location: University of Liverpool, Peach Street, Liverpool L69 7ZL英国

Comments

Post a Comment

Popular posts from this blog

Image
 WEEK4 (last update 23/02/2023, Yibing) Process checking fix the failed code (Bluetooth connection) circuits soldering connect the receiver circuit to the car kit with a 9 volts battery  figure-1 connect the transmitter circuit to the glove with a 9 volts battery set different speeds when going forward  test all the functions forward/stop/ turn left/ turn right with different speeds  Issues occurred speeds might not be distinctive enough due to the limited voltage source Arduino could handle  the sensing of the gestures is rather sensitive than expected which makes going a straight line a little difficult.  Additional tasks prepare for the presentation  poster making  logbook checking 
Read more
Image
 WEEK2 (last update 09/02/2023, Yibing) Process checking set up the car kit by following the instrumentation figure-1 test the receiver circuit figure-2 figure3 get Bluetooth and AT commands connected so 'gestures' can be sent to the receiver later. Issues occurred We found some problems when connecting Bluetooth HC-05 to AT command. Group members have tried all the bauds and the different devices but we still can not figure out which part failed Bluetooth.  Potential limitations of this project Range Limitations: Bluetooth has a limited range of about 10 meters, which may not be sufficient for some car control applications. If you need to control your car from a greater distance, you may need to use other wireless technologies such as Zigbee or Wi-Fi. Power Consumption: Bluetooth modules like the HC-05 consume a relatively high amount of power compared to other wireless technologies. This can be a challenge when designing a battery-powered car control system Interferenc...
Read more